Electro-Voice EVID C8.2HC 8-Inch Enhanced Pattern-Control Two-Way Coaxial Ceiling Loudspeaker - Pair

Electro-Voice EVID C8.2HC 8-Inch Enhanced Pattern-Control Two-Way Coaxial Ceiling Loudspeaker - Pair

The Electro-Voice EVIDC8.2HC 8-Inch Enhanced Pattern-Control Two-Way Coaxial Ceiling Loudspeaker - Pair is an 8" coaxial transducer featuring an innovative waveguide (patent pending) that provides directivity control to 1 kHz. It provides much better music fidelity and speech intelligibility in spaces with high ceiling heights than typical flush units are capable of. Its 75° coverage pattern provides the same coverage area when used in a 21’ ceiling as a typical flush mount mounted unit in an 8’ ceiling. This loudspeaker system is a complete two-way ceiling loudspeaker package. The package consists of a bezel/waveguide assembly, grille, rear enclosure, 8-inch coax two-way loudspeaker with waveguide coupled titanium coated dome tweeter and internal line-matching transformer. The C8.2HC utilizes a transformer that offers a selection of 7.5 (70-V only), 15, 30 or 60 watts delivered to the loudspeaker system using either 70-V or 100-V lines, or 8-ohm bypass. Selection is via a convenient switch on the front of the waveguide. The perforated grille is finished in semi-gloss white powder-coated enamel. The baffle and bezel are constructed from UL 94V-0 rated ABS. The rear enclosure, with fiberglass damping material, provides an optimum internal volume for extended low frequency performance. A rear cover, with provisions for a junction box fitting, provides access to a 4-pin terminal block that allows direct connection to the speaker with 12 gauge wire and provides pass through to additional speakers. A tile bridge is included for safe suspension of the C8.2HC ceiling system in a drop ceiling that uses mineral wool, or other fiber based ceiling tiles. The EVID line of ceiling speakers has been designed to work together as a complete system in a wide range of different ceiling constructions. They provide controlled dispersion, high-efficiency, high-maximum output, ease of installation, and wide-range reproduction of music or voice.

Key Features

• 8" coaxial two-way with dual Integrated Waveguides
• Defined Coverage for High Ceiling Applications
• Waveguide coupled Ti Tweeter
• Full bandwidth overload protection
• Front baffle wattage tap adjustment
• Integrated low loss matching transformer allows for either 70v/100v or 8-ohm operation
• Includes tile bridge and mounting ring for easy installation
• Integrated ported enclosure for extended bass response
• UL and CE listed

Technical Specs

Frequency Response (-10dB)

50Hz – 20kHz

Coverage (Conical)

75° Nominal above 1 kHz

Power Handling

75W Cont./ 300W Peak

Sensitivity (SPL 1W/1m)

93dB

Max. Calculated SPL

112dB Cont./118dB Peak

Impedance

8 ohms nominal (transformer bypass)

Network

Network and Transducers protected, 12dB/oct. 2.6kHz

LF Transducer

8-in. (200mm) Polypropylene cone in waveguide

HF Transducer

1in. (25mm) Ti Mylar Laminate

Transformer Taps

70V: 7.5, 15, 30, or 60W

100V: 15, 30 or 60W

Bypass: 8 ohms

Connectors

Phoenix Type Removable, with Screw Terminals and “loop-thru”, accepts 12 GA wire

Enclosure Material

Baffle – UL 94V-O rated ABS

Backcan – Zinc plated Steel

Grille

Perforated Powder Coated Steel with Safety Tether

Support Hardware

Title Bridge, Backing Plate Support, Cutout Template, Paint Shield

Dimensions (H x Dia.)

11.9” x 12.6” (303mm x 320mm)

Cutout Size

12.625” (322mm)

Net Weight (each)

13.2 lbs. (6.0kg)